danelectro basses

pjmuck · **Posted:** July 8th, 2010, 7:16 pm

Yes, my statute of limitation for maximum amount I'm willing to spend on a good sounding turd is $600, excluding all the basses I overspent on that ended up being turds.

A $900 difference in price between a new Dano and a new JJ. Sorry, but I can't justify that much of a price difference for a sound. I would say the same thing about a Rogue Violin bass vs. a Hofner, but that's a debate better left to another thread.

Marcocolo · **Joined:** September 1st, 2008, 10:49 am **Posts:** 32

Who pays retail???? I got my JJ Longhorn w/ the extra copperburst finish in a lefty for $825 shipped.
Is it worth it over my reissue Danos, absolutely. I must admit I wouldn't have done the deal at retail.

danomite64 · **Posted:** July 9th, 2010, 7:57 pm

Carmine wrote:

pjmuck wrote:

But $1200 for a Longhorn 4? :shock:

Crazy. I had no idea his list price had gotten that high!

That's too high. Jerry's Lefty Guitars in Sarasota has a new one for $997.

http://www.jerrysleftyguitars.com/jerry ... lefty.html

bugsy · **Joined:** June 7th, 2010, 2:29 am **Posts:** 220

well, i took the plunge and brought a new reissue 58 longhorn from the USA
I hope it gets here (oz)
fingers crossed.
He will be taking the neck off to ship

bugsy · **Joined:** June 7th, 2010, 2:29 am **Posts:** 220

arrived today with the neck off.

OK, now where do i get started?

the wooden bridge plate doesnt have any indents for the strings, so i guess the strings will make that when tightened.
I have screwed the bridge in, not tight yet.
I have turned around the nut, the nut gaps look angled abit, so i might have to file them straight?
truss rod cover doesnt fit back on with the nut turned around so either countersink the screw or cut a small slice of the truss rod cover back abit

The unfortunate part is the guy forgot to put the neck screws in the package, but he informed me of this and has put them in the post.

How should i start to put the bass together?

AzWhoFan · **Joined:** March 14th, 2008, 10:57 am **Posts:** 2866

bugsy wrote:

arrived today with the neck off.

OK, now where do i get started?

the wooden bridge plate doesnt have any indents for the strings, so i guess the strings will make that when tightened.
I have screwed the bridge in, not tight yet.
I have turned around the nut, the nut gaps look angled abit, so i might have to file them straight?
truss rod cover doesnt fit back on with the nut turned around so either countersink the screw or cut a small slice of the truss rod cover back abit

The unfortunate part is the guy forgot to put the neck screws in the package, but he informed me of this and has put them in the post.

How should i start to put the bass together?

Using duct tape? very carefuly?
:twisted:

Sorry, couldn't resist ... :twisted:

If it were me, I'd wait until the screws arrive.
And wouldn't it be easier to shave off some of the nut rather than the TRC?

bugsy · **Joined:** June 7th, 2010, 2:29 am **Posts:** 220

Aluminum nut

bugsy · **Joined:** June 7th, 2010, 2:29 am **Posts:** 220

here is the finished bass

after giving up on getting the intonation right , i got an adjustable bridge.
Replaced the tuners with chrome ones.
They are acoustic guitar tuners, because normal guitar tuners would allow for the E string to fit through the hole
took the pickguard off
I found that the chicken head knobs were too easily bumped so i replaced them with jazz knobs i had laying around

AzWhoFan · **Joined:** March 14th, 2008, 10:57 am **Posts:** 2866

Just found out that Jerry Jones is retiring in about a month, and unless an angel steps in, the biz will be shutdown. Danolectro plans on making maybe 100 more instruments before closing. If you want something Danolectro, I suggest you get in touch with Jerry of Jerry's Lefty Guitars ASAP. He is going to try to place an order in the very near future (like today or tomorrow). With any luck, Jerry will be able to scratch and claw his way into placing an order for lefty instruments.

pjmuck · **Posted:** January 25th, 2011, 8:56 am

AzWhoFan wrote:

Just found out that Jerry Jones is retiring in about a month, and unless an angel steps in, the biz will be shutdown. Danolectro plans on making maybe 100 more instruments before closing. If you want something Danolectro, I suggest you get in touch with Jerry of Jerry's Lefty Guitars ASAP. He is going to try to place an order in the very near future (like today or tomorrow). With any luck, Jerry will be able to scratch and claw his way into placing an order for lefty instruments.

I'm confused by this post. :?:

Aren't Jerry Jones and Danelectro two separate entities/companies? Why would Jerry contact Danelectro? Unless he has some licensing agreement with them or something I'm not aware of and he's the only one offering lefties.

AustinLeftyBass · **Posted:** January 25th, 2011, 9:39 am

The Jerry from Jerry's Lefty Guitars and the Jerry from Jerry Jones Guitars are two different people.

AzWhoFan · **Joined:** March 14th, 2008, 10:57 am **Posts:** 2866

pjmuck wrote:

AzWhoFan wrote:

Just found out that Jerry Jones is retiring in about a month, and unless an angel steps in, the biz will be shutdown. Danolectro plans on making maybe 100 more instruments before closing. If you want something Danolectro, I suggest you get in touch with Jerry of Jerry's Lefty Guitars ASAP. He is going to try to place an order in the very near future (like today or tomorrow). With any luck, Jerry will be able to scratch and claw his way into placing an order for lefty instruments.

I'm confused by this post. :?:

Aren't Jerry Jones and Danelectro two separate entities/companies? Why would Jerry contact Danelectro? Unless he has some licensing agreement with them or something I'm not aware of and he's the only one offering lefties.

Clarification: "Jerry Jones, maker of the definitive Danelectro style guitars, is closing his shop and retiring"

sorry to have messed with your heads.

LeftyBassist.com

danelectro basses

Who is online