LeftyBassist.com
http://leftybassist.com./

Question about electronics on a Carvin LB76F
http://leftybassist.com./viewtopic.php?f=3&t=7088		 Page 1 of 1
Author:  AHNC [ April 13th, 2016, 8:49 am ]
Post subject:  Question about electronics on a Carvin LB76F
So in a moment of weakness I purchased a Carvin LB76F lined fretless off of reverb. The instrument plays quite nicely (my first Carvin) but the controls are a bit baffling. On the bass there are 2 rows of 3 nobs and a 2 position switch. I searched the Carvin site for a diagram or owners manual to figure out excatly what all the knobs are for. The volume (that one was easy to figure out is push pull which I suspect is active/passive control. The bass has a humbucker in the bridge position and a single coil in the neck position which leads me to believe the switch is for turning the humbucker into a single coil. Anyone have any experience with this setup? I'll post up some pics tonight.

Thanks
Author:  NoXX [ April 13th, 2016, 3:58 pm ]
Post subject:  Re: Question about electronics on a Carvin LB76F
This article may be some help. I don't know if you have the piezo option on that bass, but hopefully the majority of the knobs are the same..

http://www.kieselguitarsbbs.com/viewtop ... 1b6a147d36
Author:  AHNC [ April 13th, 2016, 4:47 pm ]
Post subject:  Re: Question about electronics on a Carvin LB76F
Thanks that link was perfect!!I figured most of it out. The Piezo pan had me stumped.
Author:  NoXX [ April 13th, 2016, 6:42 pm ]
Post subject:  Re: Question about electronics on a Carvin LB76F
AHNC wrote:
Thanks that link was perfect!!I figured most of it out. The Piezo pan had me stumped.


No worries! :)
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/