LeftyBassist.com
http://leftybassist.com./

VRB P5
http://leftybassist.com./viewtopic.php?f=19&t=1024		 Page 1 of 1
Author:  Rodent [ June 25th, 2009, 9:25 am ]
Post subject:  VRB P5
Although this specific neck and build isn't a lefty, this model will be available in both a lefty and righty configuration. This will feature a 1-7/8" nut width on a 22 fret 34" scale neck. The body has an added upgrade of a contoured heel and mounting ferrules (instead of a mounting plate) for easier upper fret access. Standard bridge width is 17.5mm or 18mm spacing, but I will also have this available with a 19mm bridge option that utilizes a slightly different neck (a wider heel is required to support the wider string spacing)

I have the neck completed minus the finish application, and it's heading off to the finish shop for a satin finish late next week.

ImageImage

I'll update this thread with images of the body at a future date ...

all the best,

R
Author:  Rodent [ July 31st, 2009, 10:28 am ]
Post subject:  Re: VRB P5
back from the finish shop!

Image

Image
Image

this will also be available as a lefty

all the best,

R
Author:  Rodent [ September 7th, 2009, 6:22 pm ]
Post subject:  Re: VRB P5
this one is finally in the active queue again and making progress. the image here is right after the first two strings were installed so I could validate the bridge placement and neck alignment for an even string gap on each side of the neck

Image

my client decided to change from the originally spec'd the Type B bridge and is substituting a Vintage bent plate bridge instead, so the installed bridge will soon be replaced with a different one. the custom pickguard will be on its way shortly, so this bass should be wrapping up in the next couple of weeks. the B-string resonates nicely even without a nut

all the best,

R
Author:  Rodent [ December 11th, 2011, 10:21 am ]
Post subject:  Re: VRB P5
I see I never posted a completed image of the LPB 5-string :( so here ya go :)

Image

Image


I'm also about to deliver a VRB-PJ5 in a 35" scale version. here it is just before I cut the mint/b/w/b pickguard on the CNC. as you can see, even without the nut installed those strings are pulling straight and even across the neck 8-)

Image

I'm able to offer this 35" scale version in a lefty as well 8-)

all the best,

R
Author:  andrew [ December 11th, 2011, 12:24 pm ]
Post subject:  Re: VRB P5
Nice!
Author:  Rodent [ December 16th, 2011, 12:09 pm ]
Post subject:  Re: VRB P5
heading off to Texas in about 30 minutes ...

ImageImage

this is the first time I've used a Nordy NP-5 + NJ5S combo ... I'll definitely use it again :D

all the best,

R
Author:  AzWhoFan [ December 17th, 2011, 10:24 am ]
Post subject:  Re: VRB P5
giddee-up cowboy!

That one turned out quite nicely IMO. Photographed really well outdoors.
Author:  fivebass52 [ December 18th, 2011, 4:40 am ]
Post subject:  Re: VRB P5
Just beautiful! Attention to detail is stellar... well done Rod!
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/