Is the Zon fretted?
If so,
I have a 1979 4001 MapleGlo with black pickguard and binding that I might be willing to swap. It is in pretty good shape, it is entirely functional, plays even better and has lower action than my 4003 and 4001v63. I has no cracks or chips, but it does have some some quirks to it:
• A previous owner did some re-wiring, and did a pretty sloppy job of it at that with prolific gobs of solder, but all of the electronics do work as they should.
• A previous owner added the old .0047uf capacitor in series with the bridge pickup.
• I think the pickguard is aftermarket because it doesn't perfectly line up with the holes.
• I think the neck pickup is not the original.
• The pickguard is cracked at both pickup adjustment screws of the neck pickup. I think this is because a previous owner tried to raise the neck pickup too high.
• The tuning knobs don't turn very smooth, but they work and the instrument stays in tune.
• The jack plate doesn't fit very flush against the body, so the corners stick out and can slice things if you're not careful - I put a little scrape in my parents' leather couch
I put some scotch tape over the corners to prevent this.All of those are pretty minor really, and don't add up to much on the whole. Like I said, it plays great and it's all Rick. It comes with a heavy-duty gig bag (not some cheap tube sock with a zipper).
I am at work right now, but if you are interested I will send you some pictures this evening when I get home.
