LeftyBassist.com
http://leftybassist.com./

Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trades?
http://leftybassist.com./viewtopic.php?f=17&t=5615		 Page 1 of 1
Author:  Bassaria [ October 1st, 2014, 10:17 am ]
Post subject:  Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trades?
Hey All -
Putting this out there though I may have a few options already….
Grabbed this off the bay a few months back….it sounds killer and plays like butter. Weight is good - balance excellent.
Why do I off it then? Being a lefty strung righty who plays melodically a lot…my flipped setup limits my upper range access….too bad, cause I dig the bass.
So…..I'd sell it for $850 or am open to 5er trades in the same general quality range, knowing that access is needed upon string flip.
Hit me up if you are interested.

Attachments:
Warwick.png
Warwick.png [ 499.83 KiB | Viewed 21338 times ]
Author:  markcv [ October 2nd, 2014, 10:59 am ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
I had a Corvette Proline 6 string years ago that was transparent blue with the solid flame maple body and Barts in it. That thing was unreal. It sounded amazing and sustained for days. The most piano like bass I've ever had. When I first bought it it was fretless and a 6 string fretless was too much for me so I had it fretted and my tech in Vancouver told me that it was the truest neck he'd ever seen. Tremendous quality, but I could never get my head around the Corvette body style so away it went.

Does this have the solid flame maple body? I'll bet it too is very piano like if so.
Author:  Bassaria [ October 2nd, 2014, 11:27 am ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Yep mark....solid flame maple body...piano like is dead on with sustain and clarity...
It's a killer bass....just wished I could access upper reg. in my bastardized flipped way..
Btw, for all you normal lefties, the switch back to regular orientation is the easiest I've ever seen....the brass nut has 5 screws saddles for the strings...genius!!!!! Gotta love the Germans for good tech.
Author:  markcv [ October 2nd, 2014, 7:10 pm ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Out of all Warwick's designs (and the Streamer is more of a Steinberger/Spector design), I think the Infinity, Stuart Zender, and the Dolphin Pro 1 are superb for upper register neck access. The Corvette, not so much.
Author:  Bassaria [ October 3rd, 2014, 4:49 am ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Dolphin. Drool.
Author:  Bassaria [ October 13th, 2014, 12:40 pm ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
gone to the bay……
http://www.ebay.com/itm/Warwick-Lefty-L ... 1450339487?
Author:  Bassaria [ October 23rd, 2014, 5:03 am ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Still on the bay but price bump for members here......
$800 CONUS
I'll go international but buyer needs to cover shipping. I could send with neck off to save $$ as there is not a hard shell case.
Author:  Bassaria [ October 27th, 2014, 1:19 pm ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
bump.
$750

i'll split shipping in continental us -
I'll go international but buyer needs to cover shipping.
I could send with neck off to save $$ as there is not a hard shell case
Author:  PlannedSarcasm [ October 28th, 2014, 9:08 pm ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
If it was strung lefty, I would be all over it
Author:  Jeroen [ October 29th, 2014, 5:24 am ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Piece of cake, the bass hasn't been modified to accommodate reverse stringing :)
Just set up the bridge, reverse the order of the saddles back to its old state, and reverse the order of the individual adjustment screws in the nut and you're set. Gotta love the old Just-a-nut I!

Image
Author:  gravesbass [ October 29th, 2014, 6:54 am ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
PlannedSarcasm wrote:
If it was strung lefty, I would be all over it


I believe its already reversed back to true lefty. Check the pics in the ebay auction.
Author:  Bassaria [ October 29th, 2014, 11:01 am ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Yep - been set back as I am not keeping it…..easiest reset ever - the bridge is the bomb for us mutants!
Get up with me asap as there is a backup plan set in motion for the weekend of Nov 9/10

Attachments:
image-2.jpeg
image-2.jpeg [ 237.05 KiB | Viewed 20847 times ]
Author:  Bassaria [ October 29th, 2014, 12:15 pm ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
This pic is better - noticed the saddle was mis aligned in that last one - looked wanky

Attachments:
photo.JPG
photo.JPG [ 254.31 KiB | Viewed 20839 times ]
Author:  PlannedSarcasm [ November 24th, 2014, 11:43 pm ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Bassaria wrote:
This pic is better - noticed the saddle was mis aligned in that last one - looked wanky



Still interested in this, dont know if you got my last PMs or not
Author:  Bassaria [ November 25th, 2014, 1:39 pm ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Pmd
Author:  flipsidegt [ November 26th, 2014, 10:57 pm ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Is it up for sale?
Author:  Bassaria [ November 27th, 2014, 1:52 pm ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Sale is pending but not final. If you are interested let me know in case the deal falls through. Thanks.
Author:  Bassaria [ December 6th, 2014, 9:11 am ]
Post subject:  Re: Warwick Corvette Pro-Line 5 Made in Germany Feeler/Trade
Sold. Thanks for all the interest. Have a great holiday lefty peeps!
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/